| |
 |
HJ-EC02 |
|
Location：Home > |
|
 |
|
 一、Product Name: high gloss black electrostatic spray enamel powder
二、Product model: HJ - EC02A
三、Product characteristics：
1, this product is made of steel plate with electrostatic spraying powder enamel, adopts advanced European enamel glaze production formula, electrostatic coating processing and batch quality of control technology, optimizing independent research and development according to the characteristics of electrostatic spraying, good atomizing performance, pre strong liquidity, for electrostatic spray gun system has widely applicability and performance requirements for customers, spray characteristics, firing temperature characteristics on the applicability of the deployment.
2, this product is not suitable for the steel plate with the characteristics of explosive.
3, the product after firing with high mobility, strong wetting property, improvement of porcelain layer surface smoothness, impact resistance and adhesion good resistance repeated high and low temperature 450 degree of upheaval, the performance is very comprehensive, applicable to a wide range of advantages.
4, this product through the European toy EN71 safety standards, the United States FDA food contact safety standards. (SGS test report)
四、Using method：
1, electrostatic enamel powder spray process: the workpiece before treatment - powder is not pre - flow - electrostatic spraying (recycling) - high temperature sintering.
2, the high standard of enamel powder special electrostatic spray gun system, ensure powder pre flow state good, regulate the powder spraying atomized state, to achieve spraying thickness even moderate (120-150 m). No need to dry, directly into the firing device to burn. Adjust the proportion of recycling powder did not add, to achieve the quality of the powder spray is no effect on the basic.
3, electrostatic voltage: 50 - 70KV
4, firing conditions: 840 - 820 degree C, firing time is 3 - 5min.
五、Note：
1, in the production should be according to the electrostatic spray gun system characteristics, burning into device characteristics and adjusted according to the workpiece plate characteristics, summarizes the optimal construction parameters, to achieve a high rate of the finished product, rework, scrap rate is low.
2, this product should pay special attention to moisture, as well as recycling powder should be immediately used, powder moisture will affect the static adsorption properties. If the ambient air impurities, recycling powder should be used to screen. |
| |
 |
| APPLICATION CASE |
|
 |
| |
|
|
| PRODUCTS |
|
|
 |
Alibaba：shop1357580566761.cn.alibaba.com
WeChat：HUGGIE_
skype：huggiegd@hotmail.com
Sales QQ：  |
| |
|
